Show / Hide Table of Contents
Last modified: 2024-09-14

ACL Permissions

NeoFS has an awesome set of permissions you can give to containers.

ACL stands for access control list - its a list, or table really, of rules. They are checked top to bottom to any incoming request. The first permission entry in the table that the request passes, will end the checks. To that end it is important that all DENY permissions come after any ALLOW permissions.

Types of permission

Basic ACL Permisisons

These can only be applied to containers. They are the top most priority in terms of permissions, they cannot be changed, and they cannot be overruled. If the basic permissions of a container says that no one can read from the container, then no further permission can overrule this.

Extended ACL Permissions

These can be applied to a container at any time and can "extend" the permissions. For instance, you may have a container that is private, however you may want to give a specific wallet access to the container. Like a shared container (except the container owner pays for the container). These however, can also be given temporarily, instead of changing the permissions on the container as a whole. This way the permissions can be allowed to expire and remove any privileges that they offered. To do this, a Bearer Token is issued, and sent to the wallet that should gain these new access rights.

Basic ACL Permissions

When creating a container, you are going to need to create a permission. There are multiple preset permissions you can see in the table further down

permissions := acl.EACLReadOnlyBasicRule

You can read more about ACL permissions within the NeoFS documentation however a set of available to use permissions are available. Most languages with an SDK will have constants set to these values

In the following table, names that start with EACL (e.g EACLPrivateBasicRule ) allow for extended policies to be used in conjunction with the basic ACL permissions

NameValueDescription
PublicBasicRule0x1FBFBFFFPublicBasicRule is a basic ACL value for final public-read-write container for which extended ACL CANNOT be set.
PrivateBasicRule0x1C8C8CCCPrivateBasicRule is a basic ACL value for final private container for which extended ACL CANNOT be set.
ReadOnlyBasicRule0x1FBF8CFFReadOnlyBasicRule is a basic ACL value for final public-read container for which extended ACL CANNOT be set.
PublicAppendRule0x1FBF9FFFPublicAppendRule is a basic ACL value for final public-append container for which extended ACL CANNOT be set.
EACLPublicBasicRule0x0FBFBFFFEACLPublicBasicRule is a basic ACL value for non-final public-read-write container for which extended ACL CAN be set.
EACLPrivateBasicRule0x0C8C8CCCEACLPrivateBasicRule is a basic ACL value for non-final private container for which extended ACL CAN be set.
EACLReadOnlyBasicRule0x0FBF8CFFEACLReadOnlyBasicRule is a basic ACL value for non-final public-read container for which extended ACL CAN be set.
EACLPublicAppendRule0x0FBF9FFFEACLPublicAppendRule is a basic ACL value for non-final public-append container for which extended ACL CAN be set.

Nice to Know: the ability for a basic ACL permission to allow for Extended ACL permissions is controlled by the highest 'bit' in the above value. So comparing two of the above and comparing them in binary form

NameValueBinary
PublicBasicRule0x1FBFBFFF 00011111101111111011111111111111
PrivateBasicRule0x1C8C8CCC 00011100100011001000110011001100
EACLPublicAppendRule0x0FBF9FFF 00001111101111111001111111111111

we can see here that the top two start 0001 however the final one starts 0000 . When this is a 1 , only BASIC ACL is processed.

Whats important is that if Basic ACL denies access, then Extended ACL cannot overrule.

Extended ACL

Extended ACL permissions, are rules that can be applied over and beyond a container's basic ACL permissions.

This is fantastically powerful as it allows a container owner to specify very strict and very specific rules to allow an account, or group of accounts to access certain objects within the container based on theseextendedrules.

Due to the capabilities of Extended ACL, there are a few concepts to understand

Four Concepts

When thinking about these concepts, remember,

We are creating a rule for when an actor attempts to make a request to our container. These concepts are what make up that request

  1. Operation

    1. The operation is a check against the type of request being made, e.g PUT, GET, HEAD, DELETE, SEARCH, RANGE, and RANGEHASH against the container

  2. Target

    • The target (or targets) are the accounts making the requests to our container in the first place. Using targets, we can specify different groups of accounts that this rule should apply to.

    • There are four ways to refer to groups of accounts.

      • user this is the container owner

      • others this refers to everyone else

      • system this refers to nodes on the NeoFS network. It's less likely you will use this target

      • Or a specific public key of an account

    • For each type of target, you can specify whether you want it to be included in the rule

  3. Filters

    • Where these ACL rules can get really powerful is when they are combined with object attributes. Once you have read about object attributes you will know that when an object is uploaded to a container, attributes can be attached to it. These attributes can be searched/filtered as part of building up an ACL rule

  4. Action

    • And finally the whole point of the rule in the first place - the action decides what the rule, if a match is made, either to ALLOW or DENY the request

Once you have this, the rule, containing these four parts, (which actually is a record) is added to an EACL table.

Implementation

We are going to create an Extended ACL rule that * denys 'any one else', i.e all accounts that we don't otherwise specify * allows a specific account (public key) read access to the objects * Requires the object to have an attribute LetMeIn:OK

Note, there are multiple types of attribute filter you can apply, such as filtering by object length ( AddObjectPayloadLengthFilter ) or filter by owner of the object ( AddObjectOwnerIDFilter ). Check the eacl package for functions that add filters to records Firstly we need two records. One for the others and one for our privileged key

import "github.com/nspcc-dev/neofs-sdk-go/eacl"

othersRecord := eacl.NewRecord()
privRecord := eacl.NewRecord()

Operation

Quite simple, set both records to apply to GET requests

othersRecord.SetOperation(eacl.OperationGet)
privRecord.SetOperation(eacl.OperationGet)

Targets

First we create a group that applies to the others target group - the rule that will block anyone we don't want accessing our container. Then add it to the record

othersTarget := eacl.NewTarget()
othersTarget.SetRole(eacl.RoleOthers) // set the role to 'others` 

now create a target for a specific public key

// demo public key - 33-byte hex encoded public key from N3 wallet
const pubKeyStr = "03ab362a4eda62d22505ffe5a5e5422f1322317e8088afedb7c5029801e1ece806"
pub := keys.NewPublicKeyFromString(pubKeyStr)
privTarget := eacl.NewTarget()
eacl.SetTargetECDSAKeys(privTarget, pub)

Now we can add our targets to our record

othersRecord.SetTargets(othersTarget)
privRecord.SetTargets(privTarget)

Filters

Now we can use search capabilities against attributes on objects to filter even more specifically. In this case we are going to check that the object matches a specifc key, value pair

othersRecord.AddObjectAttributeFilter(eacl.MatchStringEqual, "LetMeIn", "OK")
privRecord.AddObjectAttributeFilter(eacl.MatchStringEqual, "LetMeIn", "OK")

Now both records state that for anyone, even the privileged key, to GET a file, the attribute must match.

Action

Now we specify what each record should do if any part of the rule matches. The first match will result in that request being allowed or denied depending on what record matched

othersRecord.SetAction(eacl.ActionDeny)
privRecord.SetAction(eacl.ActionAllow)

EACL Table

To use these records now, they need to go into a table that references the container that they should be applied to

Remember to add the records ALLOW followed by DENY otherise all requests will match the first record ( DENY ) and no account will be able to access the container

table := eacl.NewTable()
table.SetCID(someContainerID)
table.AddRecord(privRecord)
table.AddRecord(othersRecord)

Notes

  • Container EACL can have a latest version (an update) but cannot be altered in anyway. A new table must be created superseding the previous

It may seem that the DENY rules in this case are redundant or that the default would result in the others group being blocked automatically. On the other hand it may seem just to easy to miss a rule and accidentally let an acount through.

You can read more about EACL rule ordering and execution here in the NeoFS spec however a high level overview:

Setting the EACL

Container

The first thing you can do is specify this against the whole container. This maybe something you would do if you were wanting to share the container's contents with someone.

You will need 1. a NeoFS client

    setEACL := client.PrmContainerSetEACL{}
    setEACL.SetTable(table)
    _, err := cli.ContainerSetEACL(ctx, setEACL)
    if err != nil {
        return fmt.Errorf("can't set extended ACL: %w", err)
    }

at this point setting the EACL against the container can take some time. Waiting is necessary to get a response.

    // wait for 15-30 seconds for eACL to be created
    for i := 0; i <= 30; i++ {
        if i == 30 {
            return errors.New("timeout, extended ACL was not persisted in side chain")
        }
        time.Sleep(time.Second)
        containerEACL := client.PrmContainerEACL{}
        containerEACL.SetContainer(containerID)
        resp, err := cli.ContainerEACL(ctx, containerEACL)
        if err == nil {
            // there is no equal method for records yet, so we have to
            // implement it manually
            if eacl2.EqualRecords(resp.Table().Records(), table.Records()) {
                break
            }
        }
    }

Of course this can be handled better with channels

Bearer Token

There is more on Bearer Tokens here , however you can add these Extended ACL rules to them so that the account that is issued with the token, can access objects within the container based on the Extended ACL rules.

To create a bearer token, you will need the private key of the container owner ( containerOwnerKey ).

This is further explained in Bearer Tokens

btoken := token.NewBearerToken()
btoken.SetOwner(tokenReceiver)

btoken.SetLifetime(100, 10, 1) // exp, nbf, iat arguments just like in JWT tokens. You can calculate the expiry using the current epoch and a number of epochs into the future
btoken.SetEACLTable(table) //table from earlier

err := btoken.SignToken(containerOwnerKey)
if err != nil {
    return fmt.Errorf("error signing token: %w", err)
}

tokenBytes, err := btoken.Marshal()
if err != nil {
    return fmt.Errorf("error marshaling token: %w", err)
}

You can then issue the tokenBytes to whichever account should have it. See Bearer Tokens for more information